PORSCHE CAYENNE TURBO FULL FLOW
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Our k24 sport turbocharger is based off the optional k24 turbochargers, found in the GT2 or 993 turbo x50 models. They are remanufactured by borg warner certified technicians in Germany and are a cost-effective solution. The remanufacturing process includes full inspection of the turbocharger to ensure proper operation after the remanufacturing process. We then disassemble, clean and degrease the unit. The compressor wheels are exchanged, lightened and modified for more air flow. All clearances / shaft tolerances are checked for precision to ensure reliability. The end result is 20-30 additional horsepower, in the low and mid rpm range over the factory turbo. The sport turbo also has less lag than a factory k24...(choose a part on the right to read more)
$2,042.70
Make a selection
Kit includes:
Software dme, power-flow kit, sport header system, sportmuffler.
Please note: this dme cannot be flashloaded. Dme must be sent to us.
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2480ccm
Compression ratio - 11,0:1
Max. Power - 150kw (204hp) @ 6000rpm
Max. Torque - 245nm (181lbf ft) @ 4500rpm
Max. Speed - 240km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 6.9s
Tuning:
Max. Power - 169kw (230hp) @ 6000rpm
Max. Torque - 280nm (207lbf ft) @ 5500rpm
Max. Speed - 255km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 6.4s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. ...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$4,261.40
Make a selection
Kit includes:
Software ecu software (flashclient cable), power-flow kit, sport header system, sportmuffler (2x90mm tips).
Some models require oxygen sensor relocation.
Genuine:
Engine - 6 cylinder boxer
Capacity - 2687ccm
Compression ratio - 11,0:1
Max. Power - 162kw (220hp) @ 6400rpm
Max. Torque - 260nm (192lbf ft) @ 4750rpm
Max. Speed - 250km/h
Max. Rpm - 7200rpm
Acceleration 0-100km/h - 6.6s
Tuning:
Max. Power - 184kw (250hp) @ 6500rpm
Max. Torque - 300nm (221lbf ft) @ 5000rpm
Max. Speed - 265km/h
Max. Rpm - 7400rpm
Acceleration 0-100km/h - 6.1s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of...(choose a part on the right to read more)
General Fitment BOXSTER 1997-04
$3,861.00
Make a selection
The moshammer evo 2 front chin spoiler blends a bit of Porsche heritage into its design with canard style winglets. This effective design transforms turbulent air into a more laminar flow, creating added downforce. Porsche active aerodynamics remains fully functional in all 3 positions and the evo 2 chin spoiler secures seamlessly into the factory locations. The evo 2 spoiler's design offers a more aggressive look but also blends perfectly with other design elements like the side skirts and rear spoiler. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of either the evo rs (991.2 turbo/s) or downforce rs...(choose a part on the right to read more)
$1,386.00
Make a selection
Kit includes:
Ecu exchange for non e-throttle models (fast load for e-throttle models), power-flow kit, header system, sport catalytic kit, sport camshafts
Genuine:
Engine - 6 cylinder boxer
Capacity - 3387ccm
Compression ratio - 11,3:1
Max. Power - 221kw (300hp) @ 6800rpm
Max. Torque - 350nm (258lbf ft) @ 4600rpm
Max. Speed - 280km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 5.2s
Tuning:
Max. Power - 246kw (335hp) @ 7000rpm
Max. Torque - 385nm (284lbf ft) @ 5000rpm
Max. Speed - 292km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.7s
For 27 + years, FVD-Brombacherhas been setting the standard for Porsche engine building and tuning in Germany. Our deep understanding of the flat 6 porsc...(choose a part on the right to read more)
General Fitment 911 1998-05
$8,958.40
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released their new system of exhaust design with the x-cellerator cross-flow exhaust system. The cross-flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the center of the muffler. ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$3,773.25
Make a selection
Vivid racing's stage2 horsepower kit for the 997 turbo takes base of our stage 1 kit and adds a high flow titanium exhaust system. The agency power exhaust system features 200cell high flow cats, full titanium construction, reuses OEM tips, and a muffler design that has an amazing sound. The kit includes our vr tuned obdii ecu flash, agency power brv's, bmc air filter, ngk bkr7eix spark plugs, as wekk. The combination of these products will give you about 630bhp which is blistering fast. The kit starts the foundation which you can further build on. The ecu flash can be installed by yourself with the included cable. The exhaust system uses the factory style tips.
Our test vehicle was run at the palm bea...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$7,425.00
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 997tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released their new system of exhaust design with x-cellerator cross-flow exhaust system. The cross flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the pounds of weight (full syst...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,773.25
Make a selection
Manufactured from vorsteiner's factory with their trademark vacuum forming production process. Hand made with only the highest quality materials used. This newly developed high tech composite production processes called dry vacuumed woven plastic (dvwp) is to replace wetlay up fiberglass and fiberglass reinforced plastic materials. Dvwp is formed using a high compression vacuum process much like the dry carbon fiber production process, to produce multiple layers of air tight composite sheets that are impregnated and bonded with the resins to create a tight and strong chemical bond.
This dry vacuumed woven plastic is advantageous in many ways to wet lay up fiberglass that typically has a much lower mate...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,712.84
Make a selection
FVD "brombacher" titan sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 42 lbs. (19,3 kg)
- material: titan
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 PorscheĀ® sound. In addition, bromb...(choose a part on the right to read more)
General Fitment 911 1989-94
From $21,479.70
Make a selection
"brombacher" catalytic bypass pipe for 964 89-94
- + 15 crank hp & + 13 crank torque
- 2 3/4" tubing (70 mm) straight through design for max. Power
- weighs 3.3 lbs. (1,5 kg)
- t 316 stainless steel for improved durability over t 304
- made in Germany
- dme programming necessary.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resis...(choose a part on the right to read more)
General Fitment 911 1987-89
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech 700 series y-pipe is designed to increase air flow to the throttle body. It is constructed with high quality, 2 1/2" mandrel bent 6061 aluminum inlet legs which merge into a 68mm OEM throttle body opening for the OEM throttle body. The speedtech y-pipe will improve flow of the additional air being generated on a modified car and deliver it to the engine quickly, without resistance - increasing power and response, while reduci...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,478.25
Make a selection
Csf manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry leading testing methods to maximize airflow and heat dissipation.
"b-tube" technology unlike a regular oval shape "o" type radiator tube, csf uses a specially engineered tube in a shape of a "b". These "b-tubes" are carefully formed and then brazed over the seam to seal. Csf is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal "o" shape tubes that are welded. The design (inlet in the middle of tube that is seam brazed) increases the heat transfer surface area of the tubes by ap...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 GT3 2003-05 911 1998-05
+650hp 997 tt (sound version) stainless steel exhaust system
The +650 hp FVD sport exhaust system is specially designed for vehicles with performance increases of more than 485kw (650ps). Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 35 lbs. (16,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit. However, we do not recommend the use of stock ti...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,049.20
Make a selection
Csf manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry leading testing methods to maximize airflow and heat dissipation.
"b-tube" technology unlike a regular oval shape "o" type radiator tube, csf uses a specially engineered tube in a shape of a "b". These "b-tubes" are carefully formed and then brazed over the seam to seal. Csf is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal "o" shape tubes that are welded. The design (inlet in the middle of tube that is seam brazed) increases the heat transfer surface area of the tubes by ap...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13
Back pressure is extremely reduced trough specific guidance and piping in the exhaust muffler.
- 200 hd cell high flow, tri metal German hjs sport catalysts
- weighs 39 lbs. (18,1 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- dme programming necessary.
We use the latest hjs cats, they are nicknamed ?hd? For high durability matrix design catalytic converters. They have a sm-matrix (winding of three flat and corrugated foils) and a special connection to the matrix sheath, which equates to extremely high durability for track and street use. The added benefit is that ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $5,815.70
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,588.65
Make a selection
B&b lemans muffler quad double wall tips Porsche 996tt 01-04
Each billy boat performance exhaust system incorporates 3 generations of fabrication skill and racing talent. Every system starts with t-304 stainless steel, known throughout the industry as the highest quality material practical for after-cat exhaust applications. All exhaust tubing is mandrel bent on sophisticated cnc machinery for a precise fit and uninterrupted exhaust flow. The use of t-304 stainless steel flanges also offers high strength and complete resistance to harsh elements. All hangers, resonators, and tips are t-304 stainless steel as well. Billy boat performance exhaust mufflers are crafted in-house with years of racing and stre...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$6,213.35
Make a selection
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- catbypass without heating
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning PorscheĀ® owner and offer unmatched performance, unparalleled quality, and incredible value. All...(choose a part on the right to read more)
General Fitment 911 1989-94
From $5,810.20
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2010-13
$1,659.15
Make a selection
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
Over 20 years of continuous exhaust development and technical expertise are drawn upon to develop the ultimate milltek sport range of performance products. Milltek sport offer an ever expanding comprehensive selection of performance exhausts which build on the successes of key marques like audi, volkswagen, Porsche, mini and bmw. This has placed milltek sport at the forefront of tuning companies and owners must have list.
milltek sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensu...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$4,745.25
Make a selection
Csf manufactures the most advanced and efficient radiator cores in the industry by using innovative tube and fin technologies with industry leading testing methods to maximize airflow and heat dissipation.
"b-tube" technology unlike a regular oval shape "o" type radiator tube, csf uses a specially engineered tube in a shape of a "b". These "b-tubes" are carefully formed and then brazed over the seam to seal. Csf is able to use thinner and lighter aluminum material (better cooling efficiency) because this design is actually stronger than normal "o" shape tubes that are welded. The design (inlet in the middle of tube that is seam brazed) increases the heat transfer surface area of the tubes by ap...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05 911 TURBO/GT2 2007-09 911 TURBO/GT2 2010-13 911 1998-05
FVD "brombacher" sound version exhaust system for 964 89-94
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quali...(choose a part on the right to read more)
General Fitment 911 1989-94
$7,854.00
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|